Finding a jeweller who is available to fix your broken jewellery during this period might be challenging. Fortunately, there are a few things you can do at home (at least until the jewellers reopen) to repair your possessions as best you can. You can fix five types of jewellery on your own at home.
Five Simple Jewellery Repairs 1. Using glue to reset a stone
The greatest approach to retain a stone in your bridal jewellery sets when it falls out occasionally involves using crazy glue, even if it's not the most attractive fix. Verify that the stone will fit back into the setting before you begin to apply adhesive. Next, put adhesive on the metal rather than the stone's back. Before allowing the adhesive to cure, gently lay the stone into position and make sure it is as flat as you can get it. In the case that the glue doesn't successfully keep the stone in place in a prong setting, you can also use a pair of pliers to delicately bend any loose prongs over the stone.
2. Restring bracelets and necklaces
It's difficult to deal with broken pearl or bead necklaces and bracelets, and it's extremely simple to lose a few pieces here and there. Try stringing it back together to make sure you can wear it or to keep all the parts secure until you can visit a jeweller. Although silk is the greatest thread for necklaces since it doesn't scratch the interior of your pearls, you may use anything you have lying around to link everything together. Make a knot at one end, then thread the beads on, adding a knot if you can between each bead for more security.
Once you've strung them all onto the thread, you may either attempt to join any clasps that are already on there or just leave it as one solid strand to grasp onto until you can get it expertly restrung.
3. Cutting Chains and Knots
Try to unwind the pieces if your jewellery box is a tangled mess! Undo all the clasps you can see, then lay the knotted bundle on a flat surface. Next, focus on eliminating that thing first, starting with one recognisable piece. Instead of attempting to unravel several enormous grouped knots, remove each component one at a time.
A needle can assist loosen and untangle some of the finer chains if the items have knots and you're concerned about breaking them.
4. Jewellery cleaning
Although dirty jewellery might be ugly, you can quickly rinse it at home before bringing it to the jeweller for a thorough cleaning. Before you continue, keep in mind that the majority of harsh chemical, bleach, or vinegar-based cleaning procedures found online should be disregarded. Using a toothbrush and some soapy water, quickly cleanse your jewellery is the easiest and safest way to clean it. Anything else puts your stones at danger of damage (we've seen it happen to coral, pearls, and turquoise). As dirt tends to collect there frequently, make sure to give the area behind your stone settings a thorough cleaning. Once you're through, re-wash the jewellery to get a comparatively clean piece of artificial jewellery sets.
5. Replacing a Break Chain
Examine your component carefully, but keep in mind that not all chains may be mended in this manner. If there are any little lines between each connection, you may use a pair of scissors to cut them open. Using a pair of pliers, carefully unfasten one link, pass it through the other link of the chain, and then re-fasten it. Even while this isn't a long-lasting fix and will reopen if you tug on it too hard, at least it now has its previous appearance!
You are now informed about 5 simple DIY jewellery repairs you may perform at home. Please feel free to contact us in the comments area if you need help with any more difficult repairs; we'll be pleased to help.
Comments
0 comment